Dimmer for LED lamps
This product is no longer in stock
Warning: Last items in stock!
|Lighted pushbuttons||max. 5 / max. 10|
|Max. electric current||525mA|
|Min. load - Max. load||1W - 60W/120W|
|Stand-by consumption||0,08W / 0,32W|
|Working temperature||￼-10º ~ +40º|
|Temperature range at storage||-25º ~ +70º|
|Dimensions||40 x 39 x 11 (mm)|
|Nominal voltage||110 VAC / 230 VAC|
|Operating frequency||50Hz / 60Hz|
|Type of protection||IP-20|
VIDEO: OPERATION DIMMERS FIRT
This dimmer is specially developed for dimmable LED lamps. Thanks to its size and thickness (11mm), it can be installed in:
‣ Standard mechanism box (behind the pushbutton).
‣ Junction box.
LAMP MEMORY: The lamps will always turn on keeping the dimming level it had previously.
POWER MEMORY: If the power turns off, when it turns on back everything stays exactly as it was.
POTENTIOMETER CONTROL KNOB: The device has a control knob that allows you to adjust the minimum lighting level, avoiding undesirable effects (e.g. flickerings) when the lamps are dimmed at low level.
FIRT120 English ManualDownload (773.42k)
FIRT120 ManualDownload (892.88k)